Ra Workshop 3.6.43.3

Release date: 01.07.2020

Improvements

  • 360 – Slide and Swing – Casement Profiles – We have improved the mechanism of creating Slide and Swing structures.
  • 363 – Add Turkish Lira (TRY) – We have added a new currency – Turkish Lira.

Fixed Bugs

  • 361 – Project Summary – Glass Information – After changing the glass, in Materials Tab, the glass grid was not updated.
  • 364 – Double wing – adapter reset after changing the active wing – When a double window (SO+SO) was created, and the user changed the adapter profile, if the active wing was changed, the adapter resets to default value.
  • 365 – WASchema does not delete form properties set after I delete the system plan – When a system plan used on a property set was deleted, the information remains on property set.

Ra Workshop 3.6.42.10

Release date: 15.06.2020

Improvements

  • 344 – Change materials for entire project – improve the performance – We have improved the mechanism of changing the materials for an entire project, meaning the loading time for material changing is now optimized.
  • 354 – Add sash weight on reports – We have added the information about sash weight in execution plan report. This information will be available if you check the option “Show technical parameters”.

Fixed Bugs

  • 355 – Order Confirmation Report – UserName – The User Name from Order Confirmation now becomes the combination of First Name + Last Name.
  • 359 – French Language Changes – We have made some changes, re-translating some words in French.

Ra Workshop 3.6.42.7

Release date: 10.06.2020

New Feature

  • 220 – Client Quote New Option – Price Per Sqm – We have added a new option, “Show component price per surface” that shows you the price per sqm for each component.
  • 221 – Client Quote New Option – Price Per Sqm With Taxes – We have added a new option, “Show price per square meter” that shows you the price per sqm with taxes for the entire project.
  • 343 – Client Quote New Option – Show total joinery insect screen surface – From now on, you have the possibility to show/hide the total joinery insect screen surface with the new option: “Show total insect screen surface”.

Improvements

  • 340 – Show wind loading for mullion on property grid – From now on you can view the maximum wind loading for the selected mullion. If the wind loading cannot be calculated, it is not shown in property grid.

Fixed Bugs

  • 347 – Profile Order – Missing OP information when “show values” is unchecked – When the “show values” option was unchecked, the information about optimization state was missing.
  • 350 – Material Export Form – Export Images not working – When you loaded an existing .rad file in material export form, the “export images” checkbox was not working.

Ra Workshop 3.6.42.3

Release date: 27.05.2020

New Feature

  • 327 – Corner Window – From now on, you have the possibility to define the coupling angle for join and corner profiles from profile definition form – “extra“ tab – coupling angle. When the join/corner profile is selected (in scene) in property grid the coupling angle will be shown read only if the angle is fixed (the checkbox “coupling angle is fixed” is checked), and editable if the angle can be modified.

Improvements

  • 329 – Default Opening Outside – Tilt and Turn Wing – The following structures will always come with inside opening, even if the default opening is towards outside: Tilt Bottom Wing, Tilt Top Bottom Wing, Double Wing DO + SO, Double Wing DO + SO.

Fixed Bugs

  • 325 – Deactivate Used Reinforcement – We have improved the mechanism for deactivating profiles.
  • 330 – Glass Select – Changes do not apply – We have improved the mechanism of glass selection.
  • 331 – Filter from Fittings and Accessory rules do not work – The “filter” from Fittings and Accessory rules form was not functioning correctly.
  • 333 – Profile Price Export – Imperial System – When you export the profile prices in imperial system, the prices were not exported correctly.
  • 334 – French Language Changes – We made some changes, re-translating some words in French.
  • 335 – Profile Price Export – Empty Color List – If in the database was a color list without color combination, and you try to export profile prices, the Ra brings an error.
  • 336 – Reversed frame on inside opening window – We create an outside opening window and the frame is reversed as it should be. We change the window to inside opening but the frame remains reversed.
  • 338 – Ra Client Deadlock error – When there are several clients connected to the server, and they try to create or save projects, and another client there are connected try to Open Projects from Database, the application stops working.

Ra Workshop 3.6.39.22

Release date: 04.05.2020

New Feature

  • 307 – Rules – New Filter – From now on you have the possibility to view the unused rules form fittings and accessory rules form.

Improvements

  • 266 – Show Profile Order Report Without Optimization – From now on, you have the possibility to show the Profile Order Report without optimization.
  • 318 – Profile Edit Form – Mark Deactivated Profiles System – From now on, the deactivated profile systems will not be available on profile edit form if only active from profile form is checked.
  • 324 – New fields and Section Columns in label format – We have added new fields for CNC label format.

Fixed Bugs

  • 313 – Slide and Swing Tolerance – Improperly Working – The slide and swing tolerance was not working properly.
  • 317 – Default Opening Type – Towards Outside – When on the database the default opening type was “towards outside”, on double wing (DO + SO) the active wing comes with opening type “towards inside”.
  • 319 – Frame Extension – Custom Profiles – From now on, the custom profiles will not be available as frame extension.

Ra Workshop 3.6.39.17

Release date: 09.04.2020

New Feature

  • 314 – Import/Export Prices for Material Types – From Now on you can export/import prices for Material Types in excel format from Profile form, so that you can update prices faster.
  • 315 – Import/Export Prices for Color Lists and Color List Items – From Now on you can export/import prices for Color Lists and Color List Items in excel format from Profile form, so that you can update prices faster.

Improvements

  • 305 – Add “never ask again” on Window Library Update message window – We have added “never ask again” check box for Window Library Update message, and a new option on Tools-> Options-> Other->Errors and Warnings called “Show window library update message “.
  • 309 – New Profile Type – Adapter Siding window/door – We have added a new profile type – Adapter Sliding Window/Door.
  • 310 – New Profile Type – Sash with hook – Sliding Door – We have added a new profile type – Sash with Hook – Sliding Door.

Fixed Bugs

  • 321 – Client Quote – Unit Price Wrong Value – When we have a component with no value, the information about Installation was displayed for unit price.
  • 322 – Outside Opening – wrong color display – The color code for outside was wrongly displayed when the opening type was outside.

Ra Workshop 3.6.39.8

Release date: 19.03.2020

New Feature

  • 284 – New Report – Finished Profile Details We have added a new report, Finished Profile – Cutting List.

Improvements

  • 253 – Insect Screen on Sliding Configuration – Cannot draw specific structure – We have improved the mechanism of drawing insect screen on sliding configuration.
  • 266 – Show Profile Order Report Without Optimization – From now on, you have the possibility to show the Profile Order Report without optimization.
  • 267 – Add Default Secondary Material Species on Project Settings – From now on, you have the possibility to set default secondary material type from Tools -> Options -> Project.
  • 271 – Add Fittings & Accessory and Processing Operation rules for Fixed Casement Wing Type – From now on, you have the possibility add Fittings & Accessory and Processing Operation Rules for fixed casement wing type.
  • 282 – Localization – Profile System – We changed the translation for “series” to “profile system”.
  • 283 – Bill of Material Report – New OptionWe have added a new option for BOM report, so that you are able to view the report without RAW profiles, and the price from RAW profile will be shown by Profiles.
  • 285 – Bill of Material – Add Material Type Report Grouping –From now on, you are able to group the Bill of Material report by Material Type. (For wood databases)
  • 287 – Rename Reports – We have done some renaming for reports as follows:
      • Raw Profile Details was renamed to Raw Profile – Cutting List
      • Cutting Quotation was renamed to Profile – Cutting List
      • Cutting Optimization was renamed to Profile – Cutting Optimization

     

  • 293 – Pivot Door – Missing Properties – We have added some properties for Pivot Door: Opening (Left/Right) and Opening type (Towards Inside/Outside).
  • 294 – Localization – Grip Side – We have renamed the “Grip Side” to “Hinge Side”.

Fixed Bugs

  • 265 – Profile Order – Unit Price Zero – When the Profile Order report was shown with volume information, the unit price was zero.
  • 273 – Profile Position rule parameter is missing from Labor Rule Templates – The Profile Position rule parameter was missing from Labor Rule Templates.
  • 297 – Pivot Door – Changing the color affects the pivot quote –If the pivot quote is other than default, and you change the color of component, the pivot quote was drawn improperly.
  • 300 – Frame profile – Sash tolerance not working for pivot door/window – The sash tolerance that is defined on frame does not apply on a pivot structure.
  • 301 – Execution Plan – Opening Type not shown for Pivot Structure – The Opening Type does not show on Execution Plan when we have a Pivot Structure.
  • 303 – Pivot structure – Rules with Structure Type Parameter do not work – The rules with Structure Type Parameter didn’t work on Pivot Structure.

Ra Workshop 3.6.37.8

Release date: 03.02.2020

New Feature

  • 230 – CNC Processing – Soukup Spectra – From now on, as a production you have the possibility to export file using Soukup Spectra Communication Protocol for Processing, so that you can use Soukup Spectra in automatic mode.

Improvements

  • 165 – Add new options for Order Confirmation Report – We have added a new option on the Order Confirmation Report, these new options are called “Show Profile Information” and “Show Series Information”. You can find the same options on Window Panel Report.
  • 181 – Add message for “limit for secondary text and main text” in tools option – We have added the message for “limit for secondary and main text” in Tools -> Options -> Texts. Implicitly, the limit is 1024 KB and you can modify this limit from Other Options -> General -> Application -> Maximum Text File (add value in KB). Important! If you add larger Image (more than 3MB) on your main and secondary text, the Project Database will be very large.
  • 196 – Color Combination and Color List – Deactivation – Now, if you deactivate a color list, the color list will be marked as inactive on the Profile Edit Form and Profile System Edit Form.
  • 217 – Add Paste Color list on Fittings and Accessories – We have added Copy/Paste Color List on Fittings and Accessories form.
  • 240 – Implicit V Cut Split – Mullion – We have added “V cut split” on cutting type form profile edit form (extra tab).

Fixed Bugs

  • 112 – Cannot select and change mesh of component – We have improved the mechanism of glass selection.
  • 170 – Handle quotation disappears on XO sliding configuration –When you had a XO sliding configuration, if you select a single wing, the handle quotation disappears.
  • 197 – German language changes – We made some changes, re-translating some words in German.
  • 211 – Mullion Corner Align tool – freeze – The mullion Corner Align tool, not working when we have a component with arch on top head, and double casement opening.
  • 225 – Cannot open old pivot project – After the latest Update, you couldn’t open old pivot project from file.
  • 227 – Slide and Swing – error message “The frame is not suited for this wing type!”
  • 228 – Slide and Swing – Wing type returns to initial option – When you change the wing type, then you change the structure type, the wing type value returns to initial option.
  • 229 – Slide and Swing – Cannot change profile when I change No of Wings – When you increase the number of wings, the Top and Bottom sashes from wings become window sashes, and you cannot change them into door sashes.

Ra Workshop 3.6.35.7

Release date: 16.12.2019

Improvements

  • 182 – Default settings for Material Type – From now on, you have the possibility to choose the implicit material type from Project Options.
  • 191 – Add Select and Unselect all on Material Export Errors – From now on, you have the possibility to select and unselect all errors from Material export errors.

Fixed Bugs

  • 201 – Custom shape – not working after resize – From now on, all geometric shapes with 5 points, and convex form, is recognized as “pentagon”.
  • 203 – Wrong Weight sash calculation – The reinforcement of sash was added twice on the final Weight. First was come in sash weight, and second was come as reinforcement weight.
  • 206 – Slide and Swing – magnaline error after last update – After the last update, the Slide and Swing window library from magnaline was no longer working properly.

Ra Workshop 3.6.34.3

Release date: 19.11.2019

New Feature

  • 73 – Cutting CNC Opticut – From now on, as a production you have the ability to export files using Opticut Communication Protocol for Cutting, so that you can use Opticut in automatic mode.
  • 114 – Cutting CNC Ozgenc – From now on, as a production you have the ability to export files using Ozgenc Makina Communication Protocol for Cutting, so that you can use Ozgenc Makina in automatic mode.
  • 121 – Project Analytics Report – From now on, you can view in the Quote Activity Report, the activity of a period. (E.g. All Quote Project). The report contains information about Client, Value, Created Date, Type, Phase etc.). You will find the report in Reports -> Global -> Project Analytics.
  • 144 – Add new wing type – fixed casement – From now on, as a production you have the ability to export files using Ozgenc Makina Communication Protocol for Cutting, so that you can use Ozgenc Makina in automatic mode.
  • 154 – Add swing and slide on casement system – From now on, you can use casement profile for slide and swing window.
  • 162 – Vertical Pivot Door – We have added a new door type – Vertical Pivot Door.

Improvements

  • 90 – Add Import type column in Data Sets tab from import form – We have added the Import Type Column in Data Sets tab from import form.
  • 99 – Add Import Button in the contacts form – From now on, you have the possibility to import contacts from excel format.
  • 135 – Automatic data update mechanism must be improved – We have made some changes at the update data mechanism; we increased the data import speed.
  • 138 – Export cutting CNC Opticut without cutting optimization – From now on, you can export the cutting CNC file for Opticut, without using cutting optimization.
  • 139 – Outside Opening – wrong color display – The color for outside was wrongly displayed when the opening type was outside opening and “viewed from” was outside.
  • 140 – Same code of profile if prefix and suffix is null – From now on, you can have the same code of profile if the prefix and suffix are null.
  • 141 – Add new report – Profile Order without bar length – We have added a new option on the profile order report, that displays the volume without bar length information. You will find this option into the “content” look-up and it’s called “No bars”.
  • 142 – Cyrillic letters not working on TT415 CNC and RC600 – The Cyrillic letters do not work on TT415 and RC600 cutting CNCs, so we made a transliteration.
  • 143 – The “role” column from “components” tab must not be visible – When the profile is made from another material than wood, the “role” column does not exist into the “components” tab.
  • 186 – Add fixed casement button after all casement wing type – We have moved the “fixed casement” button, after “tilt and turn” button.
  • 187 – Add pivot door button after the last door wing type – We have moved the “pivot door” button, after “double wing door” button.
  • 188 – Pivot door – Opening symbol – The opening symbol for pivot door is drawn as opening door symbol.

Fixed Bugs

  • 87 – Cannot paste processing – On the Mecal and Soukup Arcus, we can’t paste processing on the CNC options form.
  • 128 – Medium Joinery price per sqm (without taxes) was affected after the last update – Before the update, this price was calculated based on the value with discount, and after the update the price is calculated based on the value without discount.
  • 131 – Exception when I add an arc raw section – From now on, you can’t add a raw section if the raw section is inactive. You can add inactive raw sections and arc raw sections only on inactive sections.
  • 137 – Wrong value for FBM in Profile Order report – In the profile order report, the value of Volume in FBM was wrongly calculated. The value was multiplied by 1000.
  • 149 – Wrong dimension of triangle in Client Quote Report – If you have triangle on right component, in the client quote the dimension was wrong displayed.
  • 185 – Exception at processing operation drawing – An error occurred when you wanted to draw the processing operation.

Ra Workshop 3.6.27.5

Release date: 19.09.2019

New Feature

  • 115 – Add Services when BOM is hidden – From now on, as a Dealer you can add services on a project even if you cannot see the BOM, so the quote reflects all the products and services you provide. Therefore, we have added a new tab page at project level and at component level.
  • 118 – Raw Profiles Details Report – We have added a new report called “Raw Profiles Details” that shows all the raw profiles including their H, W and length, and the semifinished profile with its length. The information appears only if a semifinished profile exists.

Fixed Bugs

  • 119 – The filter from glass selection form is not working properly – The filter from glass selection form did not work properly. We have improved the filter mechanism, so you can filter the glass much easier.
  • 120 – Information about secondary material species appears on the reports – The information about secondary material species appeared on the reports, even if we don’t have set this information in the database.

Ra Workshop 3.6.26.4

Release date: 26.08.2019

New Feature

  • 66 – Welding CNC Rotox SMK – From now on, as a production you have the ability to export file using Rotox Communication Protocol for Welders, so that you can use a Rotox SMK in automatic mode.

Improvements

  • 93 – Add Component Accessory Filter on the Processing Operation Form – We have added a new filter, “Component Accessory” on the Processing Operation Form. This filter will help you filter the processing operations by component operations.
  • 106 – CNC Soukup Arcus – Add first and second tenoning – From now on, you can set First, Second and End Tenoning for each Raw separately from the new tab “Tenoning Operations” from CNC Options form.
  • 107 – Contact list – user rights – From now on, with the new user right “Access all contacts” the user can see only the contacts added by him when a project is created.
  • 108 – Save as – modify “created by” user – From now on, when an user opens a project that was created by another user, and clicks “save as”, the value of “created by” will become the current user.

Ra Workshop 3.6.24.7

Release date: 05.08.2019

New Feature

  • 66 – Welding CNC Rotox SMK – From now on, as a production you have the ability to export file using Rotox Communication Protocol for Welders, so that you can use a Rotox SMK in automatic mode.

Improvements

  • 71 – Glass price calculate by Lite Count of Georgian bars – We have added a new function template into Fittings and Accessories rules which allows you to calculate the price of glass by Lite Count of Georgian Bars. The rule template is: Use “accessory” on “fixed” by formula “quantity = a*n+b”, where n = lite number.
  • 81 – Add tolerance between arc segments – As a wood production, you are now able to set tolerance between arc segments. To set this tolerance, you need to go on the raw profile, and at “tolerance” tab set “welding tolerance”.

Fixed bugs

  • 80 – Soukup Arcus export raw shape points – We have made some changes at Soukup Arcus Processing CNC.
  • 103 – The X button from Glass Tolerance column is missing –The X button from Glass Tolerance column from Profiles form was missing.

Ra Workshop 3.6.23.13

Release date: 08.07.2019

Improvements

  • 70 – Add tolerance between arc segments –From now on, you are able to set tolerance between arc segments.

Fixed bugs

  • 69 – The compound profiles don’t export into the Arc Panel Report – The compound profiles do not export into the Arc Panel Report, even if the profile had set “curving mode” as “milling”, and in Arc Panel Report, the “only milled arcs” option is checked.
  • 86 – The Raw Profile is not generated in the BOM – The Raw Profile is not generated in the BOM if material type is not defined in the database.

Ra Workshop 3.6.23.6

Release date: 25.06.2019

New Feature

  • 60 – Secondary Material Species – From now on, you have the ability to use two material species on wood windows. A wood window can be made from two different wood species. There can be several reasons for this: Price, one type of wood is not suitable for exterior, or even aesthetic. Sometimes, the components of a compound profile can be made from different species

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 65 – Cannot export hardware system – The user cannot export a hardware system, due to an error about rules that use Window Technical Parameter.
  • 35 – Unable to resize the profile system look-up – The user was unable to resize the Profile System look-up from profile edit form.

Ra Workshop 3.6.22.1

Release date: 31.05.2019

Improvements

  • 28 – Add new option to Hollinger MSE welding CNC – We have added new option to this CNC. The new option allows to rotate the component if dimension is not into the interval. To define this interval, we have added 4 options (X min, X max, Y min, Y max). The second option let you to choose if you want to rotate or not, and the last options let you to choose if you want to export the profiles that do not match.
  • 29 – Add limit for secondary text and main text – We have added an option into the application, where you can set a limit of the data (1Mb) for secondary text and main text (.rtf). Now, if you add a big image (e.g. 8 Mb), the image will be saved on each project from database what will lead to a very large database. If you want to add a big image, you can modify the value from Project Options from Tools-> Options -> Other -> Project -> Maximum text file (KB). Be careful, you must set the image size in KB, and the image must be in .png format because if the format is .jpeg, the ra will convert the image in .png format, and the image will be bigger than the actual image.
  • 55 – CNC Soukup Arcus modifications – We have made some modifications at CNC Soukup Arcus as follow: Origin point from options is deleted, the translations are now formed of X coordinate of the first point from the arch and Y coordinate of the bulge point of the arch. If we have Arch with panel, if compensation profiles left and right are not the same as the top one, prof 2 will be empty.
  • 58 – Bulgarian language changes – We made some changes, re-translating some words in Bulgarian.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 46 – Wrong information about costs in Project Analysis report –If I create a project with main text and extra cost and I save the project into the database, then I change the Project Phase from Project Management, the Text and Extra cost disappear from project.
  • 47 – The “typed values” is incomplete on an old project – When an old project was loaded, on field “values” from property grid, you were not able to see the all “typed values” when “Computing Mode” was changed to “Surface Unit Price”. Now, if you have dealer on project level, for every computing mode you’ll get only the supported groups (shutters, prefabricated insect screen and glass).
  • 44 – Load Button doesn’t load older backups – If I want to load an older export file (.rad) that doesn’t have one tab (e.g. technical parameters), the application brings an error and doesn’t load the data from .rad.
  • 52 – Esc button not working on forms Now, you can close any form with Esc.

ral.

Ra Workshop 3.6.21.4

Release date: 07.05.2019

New feature

  • 14 – Design Sheet Customization – From now on, we have capacity of changing the look of the design sheet. In the left panel we are able to alter: Category designation, Category visibility, Command Designation, Command Visibility.

Improvements

  • 17 – New Command – Design Sheet – We have added 4 new command in Design Sheet: Sliding 3 Sash, Sliding 4 Sash, Sliding 3 Door Panel, Sliding 4 Door Panel.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 31 – Profile system not visible while using only active – If you are using only active button and want to add a new profile system on a profile edit form, the added profile system does not appear in the look up. Also, if you want to add it again, a message appears.
  • 30 – Text and Extra cost is missing from saved project – If I create a project with main text and extra cost and I save the project into the database, then I change the Project Phase from Project Management, the Text and Extra cost disappear from project.
  • 39 – We have made some revision at translated words in es-ES.
  • 41 – Color Combination Code for CNC Graf CLF – If I have a neutral double laminated, neutral inner laminated or neutral outer laminated profile, this CNC exports WH instead of color combination code. The color should be WH only when the color combination type is Neutral.

Ra Workshop 3.6.20.10

Release date: 02.04.2019

Improvements

  • 5 – Add double cutting on Rotox CNC LA 396PC – We have added an option on this CNC called “use optimization” that help you to export double cutting on Rotox LA 396 PC cutting machine.
  • 6 – Add load button on material export – We have added a new button into material export option. From now on, you can load an old export file into material export and the options will fill in automatically.
  • 10 – Changes at CNC Graf Synergy – Welding – We have added new values for color combination types in export file, WH – white, C – laminated, P – coated.
  • 12 – Add glass category in profile system edit – From now on, you can set glass category on a profile system, so you can use only that glass in a project when you make a component that use that profile system.
  • 13 – Changes at Processing CNC Graf Synergy – We have added new parameters that appears in export file.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 2 – Processing operation edit form – some information does not save after edit – the information was not saved when we changed the values of “processing length”, “tool radius” or “offset”.
  • 3 – Dead Lock Error -Ra Workshop Client – During deletion of many components the other connected clients cannot save projects to the database.
  • 4 – Cover wings – default value after reset profile type – Each profile has a default value for cover wings. When we changed the profile type of an existing item, the cover wings value does not reset to default.
  • 11 – Bar code not match on Graf Synergy CNC – The bar-code from export file was not well generate, and did not match with the bar-code from label file export.
  • 22 – Processing CNC options does not correctly serialize – CNC options for Thorversten PBZ does not correctly serialize. In 15.3 version the bar-code type was: “Project Code; Wing Index; Segment Index”, and after update the bar-code type: “Project Code; Wing Code; Segment Index”, so I don’t have identical bar code in cnc file export.
  • 24 – Format insect screen info option is not saved after reopening the application – The format insect screen info option does not save after reopening the application.
  • 26 – Prefabricated Insect screen missing from Client Quote – After added the option “Format insect screen info” in Report Options, the prefabricated insect screen missing from Client Quote.

Ra Workshop 3.6.19.2

Release date: 28.02.2019

Improvements

  • 8103 – Add extending mode on profiles that comes in BOM from rules – We have added the “extending mode” property for profiles that comes in BOM from rules. You can now optimize this profile if the segment length is longer than bar length.
  • 8120 – Opening type – reports – We have added a new option to graphic reports called “Show opening type”. You can view now in reports what kind of opening type is the window.
  • 8122 – Glass panel report – viewing mode – From now on, the glass panel report comes with information about viewing mode. As default, viewing mode is from inside. For outside view you must to check “show opening type” from report option.
  • 8136 – Options for CNC Murat SC220/40 – Modified The option File version not exists anymore. We have added an option called “Data Field Count” and you can choose the number of data information. If the file version was 1 before, now you have 4 data filed, and if the file version was 2 before, now you have 2 data field.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 7975 – Urban DGU 600 cutting conflict – We have modified the barcode of component, so if you have a component with multiple quantity, no conflict exists anymore.
  • 8134 – Object reference not set an instance of an object – The Uw Analysis Report did not work when the component had no glass.
  • 8138 – Exposed property – When select the quote on the drawing, in property grid a property appeared that should not be exposed.
  • 8139 – Container counting – Container counting was not correct in cutting optimization report.

Ra Workshop 3.6.18.4

Release date: 18.02.2019

Improvements

  • 8130 – Mark inactive reinforcement on reinforcement tab from profile edit form – Now, you can view if a reinforcement is used on a profile and is inactive when you look in profile edit form
  • 8131 – Add new row – CNC Operation form – From now on, the “add new row” is on the top of the data grid.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 8128 –Text disappear when focus is on textbox – In import form at tab “special” when you want to copy the information from manufactured and branch textbox, when you focus on them, the information disappears and you can’t copy them.

Ra Workshop 3.6.18.2

Release date: 12.02.2019

Improvements

  • 8063 – Threshold tolerance – From now on exists a new type of tolerance in defining of a profile, called “no threshold tolerance”.
  • 8078 – New info on profile cutting labels – From now on, you have some extra info fields to print on the profile cutting labels report: “Hardware system”, “reinforcement name and length”. Also, you can now add picture of the component with segment in black color. To do this you must go to Report Options of Profile cutting labels and check “Show imakes with selection” and in “segment text” tab, you can edit labels to add this info to print.
  • 8115 – Add header on color combination filter – From now on, the color combination list from color combination filter look-up is alphabetically ordered, so it is easier to search them.
  • 8135 – Add Bahraini Dinar (BHD) – We have added a new currency – Bahraini Dinar.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 8119 – Ra Workshop Server – Check for updates and check for updates data wrong message – When the user clicks on “check for updates” and no update was available, no message appears, and when the user clicks on “check for updates data”.

Ra Workshop 3.6.17.12

Release date: 29.01.2019

Improvements

  • 7899 – Print services on the Report – From now on you have an option on the order confirmation report called “show services”. This option will print you the services on the report footer.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to mage sure the issues were resolved successfully.

  • 8118 – Ra Workshop Server – Shrink database message – The option to Shrink Database was ending with an incoherent message. The message wasn’t complete translated in English.

Ra Workshop 3.6.17.10

Release date: 18.01.2019

Improvements

  • 7959 – Customer list – Alphabetical Order – The customer list from “Client” tab is now as “default” in alphabetical order.
  • 8087 – Murat SC 220/40 version compatibility – From now on, you have the possibility to export processing from Murat SC 220/40 CNC in a new format.
  • 8112 – Run multiple instance of Ra Workshop – From now on, you have the possibility you run multiple instance of Ra Workshop at same PC, on different user, with different license
  • 8117 – Processing CNC MURAT SC220/40- new option – We have added a new option called “Angle orientation”. From now on, you have the possibility to choose the angle orientation. The default value is “opposite”, this means that nothing is changed, and the new value is “same”. So, you can use multiple configuration of CNC MURAT SC220 – 40.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to mage sure the issues were resolved successfully.

  • 7959 – Customer list – Alphabetical Order – The customer list from “Client” tab is now as “default” in alphabetical order.
  • 8087 – Murat SC 220/40 version compatibility – From now on, you have the possibility to export processing from Murat SC 220/40 CNC in a new format.
  • 8112 – Run multiple instance of Ra Workshop – From now on, you have the possibility you run multiple instance of Ra Workshop at same PC, on different user, with different license
  • 8117 – Processing CNC MURAT SC220/40- new option – We have added a new option called “Angle orientation”. From now on, you have the possibility to choose the angle orientation. The default value is “opposite”, this means that nothing is changed, and the new value is “same”. So, you can use multiple configuration of CNC MURAT SC220 – 40.

Ra Workshop 3.6.17.8

Release date: 08.01.2019

New feature

  • 8069 – CNC Welding export for Graf Synergy – From now on, as a Production you have ability to export a file using the Unified Communication Protocol for Welders and Corner Cleaners by Graf Synergy, so that you can use a Graf Synergy welder in automatic mode.
  • 8067 – CNC Processing export for Graf Synergy (CLF) – From now on, as a Production you have ability to export a CLF Communication Protocol compliant file, so that you can use a Graf Synergy processing center in automatic mode.
  • 8100 – CNC Processing export for Soukup Arcus – From now on, as a Production you have ability to export arc details in the xml file designed by Soukup so that I can use a Soukup Arcus in automatic mode.

Improvements

  • 7941 – Add filter in restore form – In restore form (Tools -> Management -> Restore) you can see now in extension look-up, the value “all files”.
  • 8035 – Material export improvement – In the material export errors form you can now choose what errors to be automatically corrected.
  • 8051 – Add insect screen material type in client quote – From now on, in reports, you will have information about insect screen (code). For this information you need to go to the Report Options, from application options, and change the value {0} to {0}-{1} from “Display insect screen code”.
  • 8054 – CNC options – export – From now on, you can copy Operations from CNC Options Form in .txt or .xls file.
  • 8064 – Profile form – paste tolerance – In the profile edit form, now exists a new option: Paste Profile Tolerance.
  • 8071 – PBZ older version compatibility – Older versions of Thorversten PBZ centers use a slightly different format. We have added an option to the existing CNC, so now we’ll be able to export the data in the new format. The default options export the file in the existing format.
  • 8090 – Import labor from xls – From now on, you have the possibility to import Labor data from xls.
  • 8091 – Improve export tool – Technical parameters – In the export/import tool you have now possibility to export technical parameters. Until now, if you export a fittings system that had fittings accessory plan with technical parameter, the import failed.
  • 8108 – Color Combination Code Filter in Color List – From now on, you can filter Color List based on Color Combination Code. You have a lookup besides Price Catalog Filter.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to mage sure the issues were resolved successfully.

  • 8073 – Wrong round quantity – shipment loading report – In shipment loading report, the length of profile is round to a fix number. (e.g.: I have a profile that have 5.3 m, but in report is displayed 5 m.)
  • 8075 – Mecal CNC option form – translation – In Mecal CNC Option form, the “Phase” column is not translated. This column has no caption, so it cannot be translated.
  • 8102 – Changing color resets reinforcement setting – I have a project with a certain color, with an reinforcement (A). If I change the profile system color, the reinforcement resets to the default.
  • 8109 – Copy a cell in cnc option form – When you copy a cell from CNC Option form, the Ra Workshop copied the entire row.
  • 8111 – We have made some revision at translated words in fr-FR.

Ra Workshop 3.6.15.16

Release date: 08.11.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 8074 – Invalid document format – I have a WLB with sliding components with insect screen on extension. After update, when I want to open this window library, I got an error “Invalid document format”.
  • 8076 – Project management – Project browser control wrong translate in English – We have made some revisions in English.

Ra Workshop 3.6.15.15

Release date: 06.11.2018

Improvement

  • 8046 – Default value of No. of tracks – Insect Screen – When I create a new profile with track – insect screen type, in tab extra in additional information, No. of Tracks comes with default value: 2. From now on, the default value of No. of Tracks will be 1.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 8042 – Custom properties – reported value issue – I have 2 properties sets, 1st is for Sliding inactive and 2nd is for sliding active. On sliding inactive I have a property called dummy handle, that have for value “yes”, 3 type of fittings color and for value “no”, fittings color has value “without”. When I select reported value “no”, for fittings color value “without”, in client quote the information about fittings color in not displayed, and wen I select reported value “yes”, in client quote is displayed for fittings color the value “Silver, without”.
  • 8044 – Insect screen – tolerance does not apply – If I have a sliding project, with 1 wing and pocket left or right or 1 wing with mullion with hook, the tolerance that has been set between frame and insect screen sash does not apply on the profile next to the frame. This fact is happening on the normal sliding and vertical sliding.
  • 8049 – Pocket type wrong value – When I have a monorail sliding window with 2 mullion configuration (left and right) the value of “pocket type” is null instead of none.
  • 8057 – Object reference exception at Currencies edit – When I am going to Currencies from Tool Menu and I am trying to edit the symbol cell, when I focus at a symbol cell and I press right click, the Ra Workshop bring me an exception.
  • 8059 – Restore database Czech language – We have made some updates at Czech language.
  • 8066 – Incorrect weight in profile order – The RaWorkshop calculate wrong the weight from Profile Order and Shipment loading.

Ra Workshop 3.6.15.13

Release date: 17.10.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 8033 – Wrong material reload – After opening an old vertical sliding project on a wood database, the component quotation is wrong. After refreshing (change width), the quotation is correct.
  • 8036 – Wrongly copy color combinations – When I duplicate a color combination that is used at another color combination as Alternative color, the color combinations that contain first color as alternative color are also duplicate.
  • 8040 – BOM do not regenerate at material type change – When I create a new quote project and change the material type at the project level after I created the components, the BOM does not regenerate, so I have other information and prices in BOM report towards the information displayed in property grid. If I force the material reloading, the BOM is correct.  
  • 8041 – Use raw section types does not remain unchecked – The “use raw section types” check button does not remain unchecked. So that I cannot change the weight of material type if the “use material section types” is checked. 
  • 8045 – Insect screen – opening type in client quote – When I have a project with casement window with insect screen, and opening type of insect screen is different of wing type, the information about open is displayed twice in client quote. We need the opening type of insect screen not to be displayed in reports.

Ra Workshop 3.6.15.10

Release date: 03.10.2018

New Feature

  • 8038 – Ra Workshop Czech (cs-CH) language – From now on, Ra Workshop is available in Czech (cs-CH) language.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 8026 – Wrong calculation statistics when I add extension – When you have a window with an extra cost item (e.g. extension) and go to Summary tab-> statistics, the field Glass Count, Frame Count and Lite Count are zeros.
  • 8028 – Shutter roller – The opening symbol is changed at resizing – When resizing, the opening symbol changes from vertical to horizontal.
  • 8032 – Exception at a custom property with yes/no value – I have a custom property with Boolean type. The I change the type to value list like follow: Yes, with reported value: No, and No with reported value: Yes. When I am drawing the component that contain this custom property, the program generates me an exception. From now on, you can’t make this change, and the program show you an attention message.  

Ra Workshop 3.6.15.8

Release date: 26.09.2018

Improvements

  • 8017 – Default view mode of material tab – From now on, the table from material tab of project, comes without 3 last columns, because is used in 1% of cases. So that we decided to hide them in default mode.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 8011 – Roller Shutter – Wrong drawing – When you have a Shutter roller Split, the Mullion profile is wrong drawing for inside view.
  • 8012 – Property grid – Wrong Information – When you have a shutter roller box, in property grid appears an information (misc) which should not appear for users.
  • 8011 – Section type translation – We have made some correction to the translation in English. 
  • 8027 – Client quote – Joinery value is not displayed – When you have a project with extra costs and extra elements (insect screen, roller shutter etc.) the joinery value is no longer displayed. 

Ra Workshop 3.6.15.7

Release date: 17.09.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 7995 – Effective dimension – pocket – The effective dimension for pocket from property grid disregard measurement unit that was set in application option.
  • 7999 – Client Quote – Discount – In a project with discount applied, the final value before discount appear twice in Client Quote.
  • 8002 – Composite profile – after import – After importing into the database a new profile system, the composite profile lost the component that already exist in the database before import and was added in the profile system imported.
  • 8004 – Moving sliding can’t set at 3 tracks and 5 wings configuration – We can’t set a moving sliding with 3 tracks and 5 wings with the following configuration: X O (left) O (left) O (right) XThe third leaf can’t set to moving sliding.
  • 8005 – Null value of wing type at insect screen – moving sliding – When I try to set a sliding window with 2 tracks and 4 wings configuration, and an insect screen without frame, the left wing of insect screen come without value. This fact affects the Bill of Material.
  • 8008 – Cutting angle – frame cover profile type – The cutting angle for cover frame that was setting on profile system was applied on every profile, even if one profile has another cutting angle.
  • 8016 – Carving wing type – rule don’t apply – The rules that was set for Shutter roller – inner status on carving wing type does not apply.  

Ra Workshop 3.6.15.4

Release date: 29.08.2018

New features

  • 7889 – CNC Processing export for Mecal – From now on, as a production you can export the file for Mecal processing center, so that you can use a Mecal processing center in automatic mode.
  • 7964 – Access rights review – From now on, as a fabricator with dealers and/or internal sales force you are now able to restrict access to configuration, window libraries and price lists, so that you can protect confidential information and avoid potential mistakes.
  • 7965 – BOM Managerial Report – From now on, as a manager you can to list the BOM for several projects, so that you can make statistics and place material orders.

Improvements

  • 7930 – View mode option – CNC cutting option – We have added a new look-up for view mode in CNC option. The view mode can be “Viewed from inside”, “Viewed from outside”, “Opening mode view”.
  • 7977 – Section code format options for reports – We have added a new option that allows user to see the section alias in reports. This is a Section Code Format in Application Options. Each report that displays the Section Code use this format with two parameters. {0} is the code and {1} is the alias.
  • 7985 – Processing operation edit form, rules – Measurement Unit – In processing operation edit form and in processing rules we have used standard unit system: metric. If standard system was setting to Imperial, every measurement unit was imperial and in processing operation edit form and in rules was metric. Now we use the system that is set in application options. 

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 7931 – CNC option issue – We have a set of problem at CNC option. These options can be accessed from 2 places, and the option form was different between the two places.  
  • 7937 – Generate message – Out of interval– The program does not generate message “Out of interval” for ranges that was set for “frame” and “vertical sliding” wing type.
  • 7952 – Section type translation – Spain – We made some translation in Spain; a few words were not translated correct. 
  • 7953 – Add new profile – cover wings – When a new profile type “frame – window/door” was added, this profile type comes with the value of cover wings “Unknown”, although should be come with the value ‘Outside’. This value can’t be modified before saving the profile. After saving, the look-up gets active.
  • 7960 – Production Project is used by other user – When you create a new project and save it on the database with the “save as” option then logout and login with another user, you could not open the project because the project remaining blocked by first user.
  • 7963 – Insect screen vertical sliding window – When an insect screen without frame was added, the program brings an insect screen with another profile type (Sash Single Glass) although it was supposed to bring insect screen with “Insect Screen Sash” profile type. The Wing type comes with initial value “empty”.
  • The wing type was “Fixed Sliding” and “Moved Sliding”, so I can’t add casement insect screen.
  • On the drawing I don’t see any symbol for opening type on the insect screen.
  • 7973 – Tolerance – Slide and Swing – When you had one Slide and Swing type with sliding right opening, and a tolerance was set between left sash and left frame, the tolerance doesn’t apply.
  • 7984 – Unreadable – Price Column – When you have a used price from an old catalog, the text price color is blue. The background is blue, and the price becomes hard to read. From now on, when you have a price written with blue color, the background become white, and the price is readable.
  • 7987 – Measurement unit – Processing Rules – If we had a rule for a processing that was set to a distance (not function), the distance was always in mm, irrespective of the measurement unit used. Same behavior was find in processing operations edit form.
  • 7993 – Sliding window – pocket – In a sliding window with 2 tracks and 4 wings with pocket, the wing beside pocket was sliding inactive. Now is sliding middle.
  • 7994 – Wrong width on sliding wings – Sometimes, after we change the number of wings (if an adapter on the original leaf is changed to an adaptor) the width of the wings is wrong. After one more update the size is adjusted.
  • 8000 – Insect screen tolerance – When a special tolerance between a mullion with track and sash insect screen was setting, the tolerance does not apply.

Ra Workshop 3.6.13.12

Release date: 04.06.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 7935 – Display Order is not functioning on XML file Soukup Wizard 4L CNC – The display order of the materials properties is not working on XML file. This affecting the sorting of profiles in CNC export file.  
  • 7938 – Processing screws for reinforcement on custom profiles–The screwing holes processes for reinforcement performed on one of the components of a compound profile was not working properly. Rules having the parameter “with reinforcement” are not executed anymore in new version. If the rules contain the parameter “without reinforcement”, the processes are executed correctly.
  • 7939 – Processing screws for reinforcement on custom profiles – When exporting the file for Thorwesten PBZ CNC, the program triggered an exception. If the interface language was set to Romanian (RO) everything was fine.
  • 7942 – French language changes – We made some changes, re-translating opening types and profile types in French.

Ra Workshop 3.6.13.10

Release date: 22.05.2018

New features

  • 7913 – CNC welding export for AKS 6400 – From now on, as a production you can export the file for Urban AKS 6400 welding machine, so that you can use an Urban AKS 6400 welding machine in automatic mode.
  • 7914 – CNC cutting export for DGU 600 – From now on, as a production you can export the file for Urban DGU 600 saw, so that you can use an Urban DGU 600 saw in automatic mode.

Improvements

  • 7892 – New option when change profile – cutting optimization – There is an option that, when the profile is changed, the order number of container is changed.
  • 7894 – Change display order in properties set – From now on, in properties set you will find the “wing type” above “custom properties”.
  • 7895 – New option: Format date and time – There is an option that, if you add letter “f” after “d” in “date format” editor from “reports option”, in the report footer you will find date and time.
  • 7896 – Delivery date on report – From now on, as an offer or production, when you create a new project, the default delivery date comes with value “empty”, so that this information will not appear in reports if it has no value.
  • 7922 – SectionType translation – We have solved some issues with the translation.

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully.

  • 7925 – Default value for custom type handle list is not working on sliding windows/doors – If a Custom Property of Handle List type is used on sliding leaf, Values with Position Type = “Custom” do not work. The Handle is centered instead of using the position defined in the database but the user can edit the position.
  • 7933 – Processing operation on component profile do not work correctly – If we have a profile with more than one component and we set a processing operation for one of its components. The respective operation will be processed on every component.
  • 7926 – Exclude opening type in reports for sliding windows – If we have a sliding window project, in the reports, under the picture, we have the information of opening type (“inwards” or “outward”). This information was incorrect for sliding, so we are decided to remove this information for this projects type.

Ra Workshop 3.6.12.11

Release date: 8.05.2018

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully 

  • 7921 – Problem copy range – When I wanted to copy a range from an old system to a new one, it couldn’t be copied if the created system is not saved before. This issue makes the program to generate an exception.
  • 7919 – Name change of “MultipleSlideVertical” – The wing type “MultipleSlideVertical” in the program is written without space between words. This issue affects the sorting and is hard to find.
  • 7917 – Inactive forms – “Materials” – The editor “No. of Tracks” from tab “extra” in the editing materials window is inactive for “Head Jamb” and “Sill -vertical sliding” profile types.
  • 7911 – Ultimate Windows – Pocket problem sliding wing – If an old “Single Slider” Project from database is loading, the project comes with a pocket, although the pocket state is “null”.
  • 7910 – Ultimate Windows – Insect screen problem – If an old sliding project is loading, the insect screen does not load properly, is placed over the entire length of the frame, not on the wing.
  • 7900 – Warning message: Vertical Sliding – The warning message “The construction mode of vertical sliding window was modified substantially. We recommend remaking the component.” It appears in English just when the language of application is setting in English. When the application language is other than English this message appears in RO.

Ra Workshop 3.6.12.10

Release date: 18.04.2018

New features

  • 7839 – Construction mode of vertical sliding – Construction mode of vertical sliding was changed substantially, and we recommend you to remake the project with this type of windows.
  • 7867 – Cut at 45 degree if we have different H2 – As a Production or Offer you can now to cut profiles at 45 degree wen the H2 is different so that you can get the right production reports.
  • 7847 – CNC Emeggi TCut – We have integrated a new type of CNC – CNC Emmegi TCut

Improvements

  • We have made a revision of sliding wing
  • 7835 – Glass order report – Now you have facility to draw glass with ornamental grill, and the  glass order report, the glass with ornamental grill is listed separately toward other normal glass.
  • 7856 –  Now you have possibility to add a technical parameters in the database without measurement unit
  • 7852 – Different setting use for use fraction in design and production – Now you have possibility to set different use fraction value in design and production

We have solved a set of bugs that have been reported by clients or our personal, and we checked them again to make sure the issues were resolved successfully 

  •  7874 – Problem loading adapter from old projects Abyat_Kuwait – When an old project was loading from databases, the adapter does not loading. Use adapter check box is ticked “Yes”. This problem leads to changing W of wings.
  • 7881 – SectionType translation – We had some problems with the translation of some word
  • 7884 – Cutting angle problem – There was a change in the program with regard to the cutting of the profiles witch has led to the deterioration of some projects.
  • 7846 – Show simple quotation twice in Dealer Quote Report Option – On Dealer Quote report on Report Option windows we had the same information twice on ro-RO.
  • 7858 – Consumption regeneration after price update not working – After profiles price modification, old projects, reopened with the new database loaded, still have the overall price unchanged. Even after using “Regenerate consumption” in the BOM tab, price doesn’t change. The only way to obtain the price modification is to modify, for each component, a dimension and then undo modification and even so, still is not the right price.

Ra Workshop 3.6.10.2

Release date: 05.02.2018

New features

  • 7795 – Default extra width for slidings –  As a Sales, Production, now you cand design slidings with unequal wings as default, so that you work less and make less mistake.
  • 7799 – Sliding leafs meeting without adapter profile – As a Sales, Production, now you can using sash profiles that includes adapter, so that you don’t need to add dummy profiles if the system does not use adapter.

Improvements

  • 7818 – Sash weight – From now on, the Sash Weight is displayed in the Properties Window. When the Bill of Materials is not computed, we can’t display NA. Without this feature you could not see what rule has been applied.
  • 7820 – Add Name for CNC shortcuts – On the main tool bar, we have 5 shortcuts for CNC, and 4 of them did not diplay the icon name when you were with the mouse over it.
  • 7827- Cyrillic Transliteration for Artikon and Kaban CNC – Cyrillic input was converted to Latin: “Иван Петров” -> “Ivan Petrov”. This is not only for project and client name, but also for profile, color, glass names etc.
  • 7828- Add HardwareInfo and GlassInfo as label parameters – From now on, in the label you have the name of the hardware (Maco, Roto etc.) and the name of the glass or at least the tockness (24 mm, 20 mm etc.)
  • 7808 – Bring Display Order on Column Chooser – From now on, you can change the Display Order from Column Chooser on the Profile window when you needed.

We have solved a set of bugs that have been reported by clients or our personal 

  • 7822 – Roller insect screen – Mesh not appearing in Bill of Material – We had an issue, the client “Buildersmart” had 3 profile systems (roller insect screen) that slide left and right and he adjusts the insect screen before inserting it into the housing.
  • 7830 – Rabel – Adapter tolerance is not working properly – By default the system now takes up the default tollerance for the adapter profile
  • 7813 – Unit Editor in Form Section – From now on, all the columns in Form Section use the correct editor
  • 7760 – Roller Insect Screen – Opening direction symbol not changing – When you create any roller insect screen with the system ZIP80, trying to change the opening direction, the arrow symbol remained the same. Now we fixed this problem
  • 7788  – UseReinforcement has wrong translation – The translation for property “Use Reinforcement” from property grid is now “Reinforcement” -> yes/no. The translation should be “Use Reinforcement”.
  • 7790 – Rule Filter Delete – Apply a filter on accessory rules based on an accessory code, close the form and delete the accessory, after returning to the rules form, you will get an exception and the form will not load properly.

Ra Workshop 3.6.9.2

Release date: 07.12.2017

New features

  • 7755 – Overlaped tolerances for mullions – As a Wood production, now you can obtain the cutting length of a mullion regardless what profiles is join with, so that you don’t have to define a lot of identical profiles with different processing tolerances
  • 7771 – Processing CNC for Soukup Crafter/Wizard – As a Wood production with Soukup CNC, now you can export data for Crafter / Wizard, so that you don’t have to define and use dummy profiles just for CNC export reasons.

Improvements

  • 7714 – Report date – From now on, the Report Date will be printed on each report, on the report footer.
  • 7767 – Client qoute – services options update – Client to benefit: Easy Windows, NK Windows, Warm Windows. We have updated the client quote for services for the following report options:
    1. No details works anymore like the details Detailed per Project
    2. Extra Detailed element without value on project are now in the total summary and are calculated in the final value
  • 7781 – Reports Localication on IT – We have had some translation requests from Thermo Design regarding Client Quote and Dealer Quote. We have resolved this issue.
  • 7751- Services on client quote report – From now on, The Services section have a title and also have a space between Services section and Total section

We have solved a set of bugs that have been reported by clients or our personal 

  • 7709 – Export-Import set Main Price Catalog – We have a problem when exporting a databases with Price Catalog 2 in a destination database with Price Catalog 1(not Main) as Main Export .rad file with Data Set Setiings Two Language. After importing the price was totally wrong
  • 7759 – Ra Server – Lock Database option not appearing – Lock database option did not appear in Tools – Management after resetting the interface. In Ra client was no option for Lock database.
  • 7762 – Check box Use Material on Profile 1 selection – On Form profile 1 selection from Rules the Check box Use Material has from now the correct position
  • 7768 – Add service to project default currency – From now on, when adding a service to project manually will come with default currency.
  • 7776 – Unable to create a new Profile System – We had a problem when you create a new profile system starting from zero using Add tool, and you add minimal details as Code, Designation, Manufactured and Currency, when you select OK, you had the following message: “Unable to cast object of type”
  • 7777 – Design – Change Profile System with different colors – When you move an element from a profile system to another and you have different color list you have an error Invalid Value and the system didn’t change

Ra Workshop 3.6.8.11

Release date: 03.11.2017

New features

  • 7735 – Resize Registration window Branch on Default view  –In the Registration window you can see now the Branch information, not just Supplier Information
  • 7739 – The column Covered System has been moved – The default position of the column Covered System has been moved at the end on form: Profile System
  • 7667 – Hide project in View – Now, when you create a production project with components from quote projects, a new option has been introduced that excludes quotes that have all the components already included in other production projects.

Improvements

  • 7703 – “Extra width” for wing to be made available in Sliding –Now we have added “Extra width” option (like the one in Folding) to be available in slididing. The user calculates the sliding rails according to a formula that is impossible to apply in the software, thus the Extra width option for the wings is necessary, as the user will work only with the configurations that are premade in the windows library.
  • 7668 – Thorwesren profile position – For every profile that do not have top, left, bottom or right position you can now export the orientation and the profile can be processed now
  • 7740 – Execution plan– In execution plan report, when there is no information about the profiles, hardware, glass, the header line under the component image does not appear now.

We have solved a set of bugs that have been reported by clients or our personal 

  • 7742 – Deleting Parent Accessory – Delete a custom accessory that is used in the rules and then save, a message will appear saying there was an error saving records to the database
  • 7732 – Tolerance applied in Design Mode – Tolerance applied in Design Mode does not overwrite the tolerance set on Profile or Profile System.

Ra Workshop 3.6.7.1

Release date: 26.09.2017

New features

  • 7615 – A new option was added – users with admin rights can Lock and Unlock databases; in the locked mode, the materials database will open in read-only view, so no changes can be performed.
  • 7649 – For dealers and producers a new option – “Include glass value,” was introduced in the Dealer Quote report; now, users can add glass to the Dealer Quote to sell components with glass.
  • 7650 – Starting with this version, a new field was added – “Minimum Radius”; the feature prevents the user from designing arches that cannot be manufactured.
  • 7652 – A new option was introduced for report options; users can now save the options to the database through the “Set as Default” button and upload them later for other projects.
  • 7662 – A new option was introduced which prevents users that don’t have admin rights from activating inactive materials. Also, users without admin rights can see only the active components in the database.
  • 7663 – A new button was introduced in the materials toolbars – “Only Active”. When activating it, users will see only the active components; after deactivating it, users will see all the components (active and inactive).

Improvements

  • 7648 – Updates were made to Client Quote, Dealer Quote, Window Panel and Execution Plan report options; the Show Materials option was transformed into Show series information, Show fittings information and Show glass information; the Show Materials Details was transformed into Show profile information.
  • 7661 – A new update was added – if the user designs a component that is out of the hardware range, the last valid interval will be used when calculating the hardware. This will generate a valid bill of materials even for special sized components. The user must check the BOM manually and add the extra items if necessary.
  • 7664 – An improvement was made – when a user deactivates a component from a compound item, the main item (which the compound is part of) will also be deactivated. The option applies to profiles, accessories, as well as processing operations.

Ra Workshop 3.6.2.8

Release date: 15.12.2016

Improvements

  • 7365 – In Order Confirmation report the horizontal mullion inside of a door sash was quoted in the same way as in the production report. The new behavior shows the mullion exactly like in the quote so the customer can understand it easily.
  • 7364 – Writing a multiline description/remark on a component was not showed correctly on the quote. The new behavior take into consideration the new line character.

Bugs fixed

  • 7277 – An exception was raised when trying to open the stock form (Text: Object reference not set to an instance of an object.).
  • 7372 – An exception was raised when saving a window library to the database (Text: Column ‘Id’ is read only. Description: System.Data.ReadOnlyException: Column ‘Id’ is read only.)
  • 7371 – When selecting a segment, the property grid was showing an obfuscated property under the Misc category
  • 7370 – The Cutting Optimization report (graphic version) was showing a negative segment number.
  • 7369 – After optimization, the Profile Label report was not showing the project code anymore.

Ra Workshop 3.6.2.7

Release date: 09.12.2016

Bugs fixed

  • 7315 – An exception was raised when opening a project file and trying to save it to the database as a Window Library (Text: Column ‘Id’ is constrained to be unique. Value ‘133839’ is already present.)
  • 7358 – The design on the Profile Systems form in Portuguese language was deteriorated.
  • 7363 – The design on the Glass form in Portuguese language was deteriorated.
  • 7368 – Some localization corrections were made to the French version of the Option form, Database tab.

Ra Workshop 3.6.2.6

Release date: 05.12.2016

New features

  • 7366 – The Profile Cutting Labels report is now able to display a bar code that can be used for production automation. This code, for example, can be read by the CNC machining centers that are linked with Ra Workshop in automated processes. This report is an alternative for cutting centers that do not have a printer attached.

Ra Workshop 3.6.2.4

Release date: 17.11.2016

Improvements

  • 7346 – Urban AKS 1600 CNC export has a new option.
  • 7345 – All CNC exports have a new option. Now you can choose to export the code, even if an alias was previously defined.

Bugs fixed

  • 7336 – An exception was raised when trying to open the glass selection form (Text: Object reference not set to an instance of an object.).

Ra Workshop 3.6.2.3

Release date: 11.11.2016

Bugs fixed

  • 7330 – When trying to export glass items to Excel you get the following message: “Export failed. Please check if there is enough space on your drive.” This message was incorrect based on the real facts.
  • 7331 – In glass form, Thickness property was spelled wrong.

Ra Workshop 3.6.2.2

Release date: 09.11.2016

Improvements

  • 7328 – An improvement was made to the Graf Synergy cutting center CNC export. Starting from now we are able to export V cut information. You can export it as a V cut or as a 45 degrees angle (mainly for profiles that are not symmetrical).

Ra Workshop 3.6.2.1

Release date: 07.11.2016

Bugs fixed

  • 7317 – An exception was raised when trying to generate the quote report with Show technical parameters activated.
  • 7316 – When generating the quote report with Show compact custom properties activated, on a component without custom properties the design was showing a blank table.
  • 7325 – An exception was raised when trying to save a project after you deleted a percentage from the Extra Costs tab. (Text: Conversão especificada não é válida.).
  • 7326 – The English version of the application was showing an incorrect message when trying to change the price of a list of colors.
  • 7327 – The Authentication lookup was not localized (English).
  • 7321 – Duplicated rule templates have been discovered in different databases. This could result in data transfer errors between different databases. We created a script that will fix this problem.

Ra Workshop 3.6.2.0

Release date: 28.10.2016

New features

  • 7267 – A new type of window/door is available: Slide and swing. This type of window/door has a hinged leaf on one side (or both sides), the rest of the leaf are sliding and at the end of the track they can swing, so it can open completely like a folding.

Improvements

  • 7264 – Project code generation was improved and now is available also for projects saved as files. Prior to this autonumbering was available only for projects saved into the database.

Bugs fixed

  • 7301 – Opening a project from the database will result in a Time Out exception, due to a compiled stored procedure.
  • 7282 – An exception was raised when trying to open a project (Text: The surface of parts is greater than the real surface).

Ra Workshop 3.6.1.3

Release date: 17.10.2016

Improvements

  • 7271 – The column Material in Project / Summary / Materials was repositioned for a friendly use.
  • 7269 – Cutting CNC save dialog and machining CNC save dialog did not take into account the saved path. These dialogs were opening in the last used path, instead of the path saved as a default.
  • 7278 – The Cutting Optimization report now includes numbering to keep track with the labels. The same number is available on the label and on the cutting bar.

Bugs fixed

  • 7298 – The Color Combination lookup in Glass Edit form had the same column twice.
  • 7297 – When joining two structures, one with custom properties and one without, the Execution Plan report was showing the same properties for both structures. The correct behavior is to show the custom properties only were available.
  • 7296 – An exception was raised when trying to open a project in Read-Only mode and running the Quote report while Show technical parameters was on. (Text: Object reference not set to an instance of an object.)
  • 7295 – Exporting hardware systems that contains glass rules, without exporting the glass category also will make the import fail with this message: The INSERT statement conflicted with the FOREIGN KEY constraint “FkRuleIdGlass”.
  • 7290 – Kaban Cut export will include alias were available, instead of Profile Code.
  • 7290 – The message: “The project is not optimized. Do you want to optimize it now?” appears also on optimized projects when opening on a different station, on the same database. The system now detects that the project is optimized and will not display the message anymore.

Ra Workshop 3.6.1.2

Release date: 07.10.2016

Bugs fixed

  • 7276 – In the list of parameters in the Cutting Labels report, Code is shown 2 times. None of these two fields is working. The parameter is not replaced with the code at runtime.
  • 7275 – An exception was raised when trying to generate the quote report with Show technical parameters activated, on a profile system without a Fitting plan (Text: Object reference not set to an instance of an object)
  • 7272 – In some scenarios the hinge was drawn in a wrong position outside the sash profile.
  • 7270 – When making two data exports with different options, the system disregards the second set of options resulting in an identical data file.
  • 7289 – An exception was raised when generating the quote report on a project with the delivery date set to null.
  • 7288 – On some occasions data export would fail with the message: “Error on exporting data!”.
  • 7287 – The options Show Pyramid logo was not persistent. After restarting the application, the property would revert to the default value.
  • 7286 – An exception was raised when trying to generate the Order Confirmation report (Text: Object reference not set to an instance of an object.)
  • 7283 – When adding 10 frames inside a component, frame number ten (F10) was between frame one (F1) and frame two (F2). A new sorting type was implemented.

Ra Workshop 3.6.1.1

Release date: 30.09.2016

Improvements

  • 7261 – Custom development: The Abyat export form displays the number of records.
  • 7260 – Dimension format parameter was added as an option. Now you can choose the way you want to format the dimension between L x H or H x L. Previously this parameter was present only in the configuration file.

Bugs fixed

  • 7279 – Starting with version 3.6.0.8 there was a calculation error in French windows/doors. The two leaves were overlapping.

Ra Workshop 3.6.1.0

Release date: 28.09.2016

New features

  • 7037 – You can copy a rule template from an existing rule and apply it to a set of other rules. Finding the right rule template for every rule you wanted to change was considered time consuming.
  • 7195 – CNC integration with Teleios machines in automatic mode (Teleios, Soenen Hendrik Dem Modular, Soenen Hendrik DVE, Soenen Hendrik Q4).
  • 6888 – The report title can be customized as a RTF document with merged fields. This will allow users to display any information in the header, with the exact format they need. In this way, the user will be able to design a header with client info displayed in an area visible when the offer is folded and enveloped.

Bugs fixed

  • 7249 – Glass filtering did not work as expected when using a profile system with a glass filter defined. The default glass was overwriting the glass filter property on the profile system.

Ra Workshop 3.6.0.8

Release date: 22.09.2016

Improvements

  • 7048 – Dealer information fields were added to the DoP report. Up to now only the dealer name was available.
  • 7039 – The trademark “Powered by Ra Workshop” has become an option. By default, the application will continue to display it.
  • 7012 – A new tolerance is available to control the distance between the adaptor (false mullion) and the sash.
  • 7017 – Technical parameters are now displayed with full name and symbol (Ex: Frame thermal transmittance (Uf)).
  • 7257 – The Order confirmation report was revised. Several improvements have been done.
  • 7254 – A new tolerance is available to control the distance between a sash with hook and a sash profile. Previously you could control only the distance between the hook and the sash profiles.

Bugs fixed

  • 7259 – A new user could not add windows/doors to existing libraries. However, he was able to create new libraries and operate it normally. Access to the old libraries was forbidden.
  • 7259 – An exception was raised on some occasion when trying to load a project (Text: Object reference not set to an instance of an object. at Pyramid.Ra. WindowLibrary. TemplateEdge.811009876(AlignmentType , KnownSide , Boolean) .
  • 7230 – The Profile System parameter in the rules was showing extra information that was not useful relatively to the use of the application.
  • 7248 – Resizing option of Labor Categories form have been revised.

Ra Workshop 3.6.0.7

Release date: 16.09.2016

New features

  • 7243 – A new feature was added to facilitate finding the appropriate glass item in databases with a large number of items. Selecting the glass is now possible by using a filter form that enables you to find it easily, search by any parameter of the glass.

Bugs fixed

  • 7047 – Data import failed when a rule template had a different GUID in the source database, then the destination database.
  • 7046 – In some situations, the changes made in the BOM were lost after reloading the project.

Ra Workshop 3.6.0.6

Release date: 13.09.2016

New features

  • 7117 – A new set of features have been implemented to prevent users to access projects created by other users. If you work in a dealer system, a dealer won’t be able to see projects created by other dealers.
  • 7116 – Asymmetrical hardware operations can now be processed by correctly. We are now able to define operation offsets relative to the loading direction (Ex: asymmetrical mullion connector – Aluplast).
  • 6854 – Alternative color. Ra Workshop is now able search for an alternative color, whenever the main color could not be found for a certain item. (Ex: when designing Golden Oak windows the system is able to locate automatically the Brawn Aluminum insect screen).
  • 7151 – New database security policy has been enforced. The Material and Config database can now be linked and one will not load without the other.
  • 7152 – A new rule system has been implemented in order to calculate technical parameters. This system will allow the user to accurately compute the technical parameters.
  • 7113 – Panels can be defined with different color on each side. This will translate in a more accurate drawing and will eliminate some production mistakes.
  • 7191 – Custom development: the SAP export can now be influenced by the installation stage. Different type of materials can be exported with different phases.
  • 7178 – New rules and parameters have been added to the CNC machining system in order to make the number of rules as small as possible and easy to maintain.
  • 7031 – CNC Friendly Export. This new feature allows the user to export the CNC machining operations in a friendly TXT format, very easy to read and understand. This make a huge difference in CNC implementation projects.
  • 7038 – A new feature has been implemented that will allow the user to export CNC data without machining operations. This is very useful when you have a machining center that does also the cutting and you intend just to cut some profiles.
  • 7034 – A new CNC toolbar is available. This should make the application more user friendly when working with automated machines.
  • 7043 – A new option is available for the Quote report. By activating this option, the quote will display drawings in a very simple way: just height and width. No other quotations will be showed.
  • 6977 – Fixed and variable gear can now display the handle position on the drawing. The user can select different dimensions and this information will be present in all the production reports.
  • 6824 – A new error and warning message system has been implemented. Now, you can fully customize the warning and error messages users get when they design windows / doors.

Improvements

  • 7142 – For some colors (ex: Ash Black) it was difficult to see the sash / mullion / frame lines. This made the production reports difficult to read. The new behavior computes the drawing color and the selection color based on the window/door color.
  • 7119 – Custom development: SAP export is now using alias, instead of the original Ra Workshop code.
  • 7215 – The designing of the sliding windows / doors has been revised. Number of tracks parameter allows you to select any number between 1 and the total number of rails the frame has. In this way, some design errors have been eliminated.
  • 6998 – The Profile Cutting Labels report was modified and the order of the labels was changed when optimizing with double cutting.
  • 7177 – The Project Management dialog and Open Project shows the number of records (the number of projects).
  • 7108 – A new option is available in the Quote report. When activated this option will remove the surface information from the quote.
  • 7123 – The CNC Options dialog shows the number of records.
  • 7033 – An operation that was used as an item in a compound operation could not be used anymore. The new behavior allows you to use one operation as item in as many compound operations as you want.
  • 7094 – A new form is available: CNC Options. Prior to this, the user was forced to create a project in order to change something in the CNC configuration.

Localization

  • 7217 – Due to a localization or anchoring problem, the Spanish users could not change the path of the CNC export file.
  • 7193 – “View from outside” text was spelled wrong.
  • 7050 – Some parameters in the TRF custom reports had different names then the ones they have in the application.
  • 7150 – In the Spanish localization the Profile System form had an improper layout.
  • 7149 – In the Spanish localization the Material Type information was not translated.
  • 7183 – In the English localization some texts were not translated.

Bugs fixed

  • 7188 – An exception was raised when resizing a door, in some scenarios (Text: System.ArgumentException: percent at Pyramid.Ra.Geometry.Workspace.Objects.Edge.GetPercentPoint(Double percent)).
  • 7224 – Cutting optimization was lost after reloading a project with at least one irregular shape window.
  • 7241 – Database data import fails an alias conflict. (Log: “Column “ConsumeItemType, IdMaterialBase, IdMaterialExtra” is constrained to be unique.).
  • 7240 – When the size of the window/door exceeds the maximum height and weight defined on the ornamental grill a warning message is triggered.
  • 7239 – In some scenarios the ornamental grills were lost after material reloading.
  • 7238 – The image of the windows / doors in the Window Library did not reflect the ornamental grill or the grill drawing.
  • 7237 – Newly created window library projects did not appear in the Window Library tool window.
  • 7236 – Double clicking on a custom message was triggering the selection of the root element instead of the element that was actually triggering the message.
  • 7235 – Once you added a Custom Message Schema to a Fitting Plan, could not be deleted anymore. A delete button was added.
  • 7234 – In custom message rules the user could not use the functions that depend on the leaf size or the ones that refer to a specific range.
  • 7233 – Warning / error messages remained active even after Is Active property was set to False.
  • 7232 – Glass parameter form was not showing in Custom message rules.
  • 7227 – CNC cutting export was showing some differences (angles). All CNC cutting exports have need rechecked.
  • 7226 – An exception was raised when exporting for Elumatec SBZ 610 (Text: Unable to cast object of type ‘Pyramid.Ra.CNC.CNCOptions_SBZ610’ to type ‘Pyramid.Ra.CNC.CNCOptionsCutting’.)
  • 7216 – Paulistinia window is a type of sliding window that uses a tree rail frame and it is made out of a normal sliding window (first two rails) and a louver sash on the last rails. The problem was that the louver sash was always synchronized with the sliding sash and because of this the user cannot configure it as a pocket sliding sash.
  • 7214 – When designing a monorail sliding window with a fixed insect screen the bill of material was not generated. Also, the tolerance between the mullion with hook and the sash was not working properly.
  • 7213 – The Custom Message form was not properly designed and docked.
  • 7212 – An exception was raised when trying to copy/paste a custom message (Text: Input string was not in a correct format.)
  • 7208 – The Custom Message Categories form did not resize properly.
  • 7207 – When trying to use a cover profile without the priority property defined an error was raised (Text: Invalid value!).
  • 7206 – The Cover Profile tab in the Profile Edit form was showing all the profiles, instead of allowing the user to select among the cover profiles only.
  • 7174 – When changing a profile, the system did not select the default reinforcement.
  • 7026 – The system was allowing the user to create a compound processing operation having as components other compound operations. This has been restricted.
  • 7025 – Copy / pasting a compound operation would result in having the copied items in the original compound operation as well.
  • 7022 – Copy / pasting a compound operation would result in duplicating the compound items as well.

Ra Workshop 3.4.0.5

Release date: 31.01.2014

 

Status: New

  • A new way to estimate windows has been added to Ra Workshop. Starting from now you can define pricelists: matrixes with prices and rules to quote different types of windows and doors;
  • Heat transfer coefficient calculation. Based on new material properties, Ra Workshop is able to compute the heat transfer coefficient for every window and door;
  • Automated glass selection based on the window’s/door’s dimensions. Glass elements can be grouped into families and Ra is able to change automatically the glass with another one from the same family that matches the new window/door size;
  • Wind load calculation. Mullions will be selected based on the wind load calculations;
  • Warning messages are triggered when a wrong mullion is used;
  • New property: continuity point. Two consecutive segments can be computed (reported) as one if are joined by a continuity point. This feature allows you to design new shapes, like U arch from 1 segment;
  • New profile type: Raw profile. This type of profiles can be used for wood profile as a raw material. This way you can generate the profile order report with raw materials;
  • New profile type: Sash with hook. This profile is used in sliding windows/doors;
  • New profile type: Mullion with hook. This profile is used in sliding windows/doors for designing fixed with sliding sash;
  • New profile type: Mullion with track. This profile is used when designing a fixed window over a sliding one;
  • New rule parameter: compound profile. Now you can differentiate between compound profiles and profiles;
  • New rule parameter: Glass. Now you can define different rules based on the glass code;
  • New rule parameter: Filling Type. Now you can differentiate, for example, between glass and panels;
  • Accessories and fittings Excel import/export. This feature will allow you to update bulk data from an Excel file (ex: update prices);
  • Glass Excel import/export. This feature will allow you to update bulk data from an Excel file (ex: update prices);
  • Compound accessories and fittings. You can define fittings that group together multiple elements (other fittings). In this way you can add only one rule in the fitting system and the BOM will include all the sub components. This feature is similar to the way compound profiles work;
  • Auto-update. Starting from now, Ra Workshop will be able to auto-update itself. CE;
  • Mark third party integration.

 

Status: Improved

  • Profiles price can be defined based on volume. For example you can define wood profile prices per cubic meter;
  • Profiles price can be defined based on surface. For example you can define aluminum profile prices computed based on the profile mill finish price plus the powder coating per surface;
  • Color lists and the way it interacts with the profiles are improved significantly. Instead of adding colors on profiles you can add color lists. By this way you can type only on price, instead of typing the price of each color. This feature allows you to easily maintain and complete your profile colors. By adding a new color to the corresponding color list, everything is ready;
  • The cutting optimization feature is able to generate cutting optimization for the raw materials;
  • New filter methods were added to the material forms. This will help you find and edit the materials easily;
  • Color lists copy/paste functions are available for profile and profile systems. With this feature you can copy color lists from one profile/profile systems to the others;
  • Cuttings copy/paste functions are available for profile systems. With this feature you can copy cutting definitions from one system to the others;
  • Rule functions are able to compute based on weight. With these new functions you can compute accessories and fittings based on sash weight (ex: springs, hinges, counter-weights, etc.);
  • The component’s surface can be computed to include the architrave’s dimensions. The design’s quotations can include the architrave;
  • You can now define different tolerances between any profiles. This feature will allow you to configure the database in such a way so you won’t be forced to use Window Libraries;
  • You can now define different glass tolerances for each profile. This feature will allow you to configure the database in such a way so you won’t be forced to use Window Libraries;
  • Georgian bars have a special category on the design board. This improvement makes working with Georgian bars a lot more easily.

 

Status: Updated

  • Profile Order report has been updated. The new report is able to generate the order based on raw materials;
  • Offer report has been updated. The new format was updated to display technical parameters (ex: weight, thermal transfer coefficient, etc.);
  • The compensation profile was updated with new functionality. This profile is used when designing a frame inside another frame;
  • When drawing the glazing bead, each profile will determine its own behavior based on the profile definition. On the old version the bottom profile determined the behavior of all the other profiles.

Ra Workshop 3.3.1

Release date: November 15, 2011

 

Status: New

  • New measurement system. With the new version you are able to use imperial units.
  • The new imperial unit system is available for both design and reporting;
  • New profile system type: covered system. With this new system type you can compute wood + aluminum systems and uPVC + aluminum systems;
  • Multiple selections. You can select different objects on the design board and you can see and edit de properties that are common to the selected objects;
  • Surface elements (like door panels, glass) can have images attached. When you design a window/door with such an element the image will be drawn. This feature is very useful for door panels with special designs;
  • The glass computing can have a minimum surface. If the glass resulted from the window/door design is below a certain area, then the minimum surface will be reported;
  • If the glass has an irregular shape the minimum surrounding rectangle will be reported;
  • This feature is optional, but is very useful on irregular shaped windows;
  • New CNC machine: SAC Sueri F300;
  • Ra Workshop is available in 15 languages. The new languages are: Polish and German.

 

Status: Improved

  • The statistics page has been changed to show data in a more relevant way. New statistic data has been added;
  • The report engine has been optimized for speed and design;
  • The RTF control used to write the main and secondary texts has been replaced with a new control with better functions;
  • The extra costs system has been improved. You can define an extra cost to act as a markup or as a margin. You can also apply it only on selected group of materials;
  • You can control the order in which the extra costs will be computed.

 

Status: Updated

  • You can now design folding windows / doors with unequal leaf.

 

Status: Fixed

  • When checking for the license the software deactivated on the first connection fail. The problem has been fixed;
  • When changing the materials on a project with that had joined windows/doors the join profile reverted to the default profile after material replacement. The problem has been fixed. The join profile will be the same after you update the profile system.
 

Ra Workshop 3.3.2

Release date: July 27, 2012

 

Status: New

  • A new window type is available: double tilt and turn window – two sash window with both sash tilt and turn;
  • V cutting. Mullions can be configured to use V cutting instead of square cutting until now;
  • New parameter in profile definition: sash tolerance. A different sash tolerance for each side can be defined. In the previous version a profile system had only one sash tolerance. Now each sash can overwrite the main sash tolerance by defining its own tolerance. This feature is very useful when designing windows/doors with different profiles top, bottom, and left/right;
  • New parameter in profile definition: position. With this new parameter a profile can be configured to be used only on a certain part of the window/door (ex: bottom only). This means that we are now able to configure default profiles for each side of the window;
  • This feature is very useful when designing windows/doors with different profiles top, bottom, left/right because starting from now you do not need to select manually the profiles. It will come up automatically, as defaults. You can also have different default vertical and horizontal mullions;
  • New report: Cutting labels. This report generates labels containing cutting, optimization and production information. The labels are highly configurable in size and the information you want to display. Just print the report on a self adhesive piece of paper and fix it to the cut profiles;
  • New report: Product labels. This report generates label that can be attached to the finished product: window/door. The labels are highly configurable in size and the information you want to display;
  • New report: Shipment loading. Each element in the database can be defined by specifying also the weight. By this way, Ra Workshop is able to compute the total weight of each window/door. This report is very useful when loading the finished products into trucks and you want to know the total cargo weight;
  • A new profile type was added: track cover. This profile is used to cover the rails on a track on a sliding window. This new feature will allow you to compute a profile that was impossible in the previous version;
  • SAP/ERP integration. All the materials inside the database can have an alias – an external code. Using the export tool the BOM can be sent to other applications.
  • The new version is available in 3 more languages: Italian, Persian (Farsi) and Chinese.

 

Status: Improved

  • The sill design was greatly improved. A new sill button is available on the design board, in miscellaneous category. When adding a sill Ra Workshop creates a special object containing 3 profiles: solbank (bottom extension), inner sill and outer sill. You can use any combination of the three profiles;
  • The default property of a profile was replaced with a new one called Priority. A profile system can be configured in such a way that profiles will be used with a certain priority;
  • The project loading operation was optimized. Now it takes less memory and less time;
  • The performance is evident on large projects;
  • The report generation mechanism was improved. In the previous version generating the first report would take more than 45 seconds. This was due to the printer settings loading with a big delay. Now, all these loading are done in a different thread speeding up the report generation process;
  • The material forms have new ways to filter the data. This will make your life easier when searching for a certain element;
  • The quotation editing was improved. Now the data validation is done on lost focus, so don’t necessary need to press enter;
  • The Open Project dialog contains a new filter: customer phone number.

 

Status: Updated

  • The material selection system was changed. The new system in more easy to use and most important reflects 100% the materials used inside the project;
  • Profile definition was updated. You can now specify different bar length and different reinforcement for each color;
  • The behavior of typed price windows/doors was changed. The new typed price will be multiplied with the number of components in order to generate the total window/door price;
  • In the Execution Plan each component is now showing on a new page. An option was added in order to keep the old behavior;
  • Profile Order report was updated and know computes the total profiles weight;
  • A new option as added to Offer report. You can choose if you want or not to display the opening and view mode on the quotation;
  • The Glass Order report has a new option that allows you to filter regular vs. irregular shapes. With this option you can eliminate irregular shapes from this report, because you will use Glass Panel for special glass shapes.

 

Status: Fixed

  • The reinforcement of the carving profile was not generated in the bill of material. The problem has been fixed;
  • A compound reinforcement did not decompose in its components. The problem has been fixed;
  • The color combination list form had a wrong behavior during resize. The problem has been fixed;
  • Changing the hardware or the glass on a project was leading to the loss of the cutting optimization. The problem has been fixed;
  • When making a project with Without Glass feature was generating a warning related to the glass thickness. The new behavior does not generate the warning;
  • The vertical sliding window did not show the quotations for each sash. The new behavior is similar to a regular sliding window;
  • When selecting the scene some weird properties were available in the property window;
  • This information was removed;
  • The filter for image selection did not include .jpg files. The problem was fixed;
  • Restoring a database using the Brazilian – Portuguese language was generating an exception. Text: Input string was not in a correct format. Description: System.FormatException: Input string was not in a correct format. The problem has been fixed;
  • On some occasions a component was displayed on two pages. All the details are now kept together;
  • Importing glass with Delete unimported data did not functioned properly. The old glass remained in the database. The problem has been fixed;
  • When designing a window/door with property Use Profile = No on the frame, the bill of material did not contain any data. The problem has been fixed and the BOM contains the remaining materials;
  • When deleting a window library project while the Window Library window as open an exception was raised during data refresh. The problem has been fixed;
  • The multiple split dialog did not allow any quote editing after the splitting. An error was raised no matter what value where you typing. The problem has been fixed.
 

Ra Workshop 3.3.5; 3.3.4; 3.3.3

Release date: September 2012 – September 2013

 

Status: New

  • We have added groups in Project Explorer. Now you can create a group, having a name, a description and a delivery date and you can add windows/doors to that group.
  • In this way you can split your large projects into delivery groups;
  • New CNC machine implemented: Soukup Wizard 4L, Fom Industrie P2K2;
  • The profile system has two new properties: revision date and revision info. This should help you keep track of your changes;
  • The hardware system has two new properties: revision date and revision info. This should help you keep track of your changes;
  • The new version is available also in Norwegian.

 

Status: Improved

  • The material connection with the database was changed and now works faster and better;
  • The folding windows have been improved by allowing it to be designed with adapters;
  • The copy/paste operation over a component will generate a friendly name;
  • The currencies have now a new property: the number of decimals used to display the values. This will allow you to run the offer reports with 3 or more decimals;
  • SAP/ERP integration. The export file was changed to include the delivery groups.

 

Status: Updated

  • The way the application is connecting to the material database has changed. The materials used now in the component design are replicated directly at the project level;
  • In this way we have eliminated the un-synchronization between the default materials on the project and the real materials used on the components;
  • Shipment loading report is now available starting with Ra Workshop Express edition.

 

Status: Fixed

  • There are a lot of bug fixes. We will not report all the bugs here and we strongly recommend updating to the latest version.

Ra Workshop 3.2.0

Release date: February 26th, 2010

 

Status: New

  • Stock cutting optimization. Optimization uses remainders from previous optimizations (stocked remainders);
  • Stock management module. Add, edit, remove profile rests (remainders);
  • Cutting optimization based on multiple standard bars (ex: 6 m and 6.5 m);
  • Dealer management. Add, edit and remove dealer company information;
  • Quotations editing. Now you can edit the window size on the design board;
  • Mullion alignments. You can select multiple mullions and align it on based on the first selection;
  • Mullion versus corner alignment. You can align a mullion based on the corner cutting shape;
  • Curved mullions. You can design mullions with both ends on the same side;
  • New custom shape design tool. Draw your own shape;
  • New custom mullion design tool. Draw your own shaped mullion;
  • New shapes available: arch and circle shapes made of segments;
  • Fixed sliding window. You can design special sliding windows with fixed glass (similar to casement systems);
  • New fittings rules based on T, Y, + mullion joins;
  • Arch Details report. The new report contains detailed information about arch cutting and production;
  • Ra Workshop allows Windows Authentication for SQL Server connection.

 

Status: Improved

  • Window and door join parameters. You have complete control over the join structure;
    You can now change the fitting system on each wing;
  • Starting with this version the Fittings System is separated from the Accessory System;
  • Material database will automatically reload itself if a change is detected;
  • Projects will connect to the database only if a change is detected;
  • The profile and fitting definition has been updated with information regarding cutting optimization (ex: maximum rest, minimum rest, optimum rest, optimization type, etc.);
  • Increased speed on saving/loading big projects;
  • Increased speed on handling big projects;
  • Increased speed on handling components with multiple windows/doors joins.

 

Status: Updated

  • The Cutting Optimization report has been updated with information related to stock optimization;
  • Application’s options have been completed with almost all the options available in Ra Workshop.
 

Ra Workshop 3.2.1

Release date: May 4, 2010

Status: New

  • The VAT value can be changed on a project. Until now it was not available on a project.
  • New warning message has been added when trying to create a sliding window with a single glass sash and you put a double glass on it (basically when the glass does not fit the sliding sash);
  • New warning message when adding sash in sash;
  • The Glass Panel report has two new options: Show detailed report (similar to the option in Window Panel) and Show angles (more details bellow);
  • The Window Panel report has two new options: Show positions and Show Georgian bars quotations;
  • You can now Copy/Paste a wing (the sash) inside an empty glass gap.

 

Status: Improved

  • The folding window has been improved. When changing the number of wings the structure type is being kept. Also now you can change the active side from left to right, if it is possible;
  • The fitting plan can be changed for each sash. Changing the fitting plan made possible also to change the profile system. This behavior was not good and it was improved. In the current release you can only change the fittings plan;
  • The way the software sets the default profile while loading a project from a file made with a different database was improved;
  • The losses usage mode was improved. The old Use Optimization Losses check was replaced with a 3 option combo box: Do not use rest and remainders resulted during optimization, Use losses resulted during optimization and Use losses and rests resulted during optimization;
  • The way the single glass adapter is drawn has been improved. Now we draw H2 + H3 and there is no gap between the profile and the glass anymore;
  • The Georgian bars have been split in two: inner and outer Georgian bars. Inner Georgian bars will be shown in Glass Panel report, while outer Georgian bars will be shown in Window Panel report;
  • The material costs in the Statistics tab were recomputed to include also the material extra costs;
  • The CAD engine has been improved.

 

Status: Updated

  • The Glass Panel report has been updated. The new version shows information related to angles different of 90 degree and also show radius for arched sides;
  • The Offer Report/Dealer Offer Report now shows the total value after discount and before you apply the VAT value;
  • If a window/door has different openings with different fittings plans the Offer Report / Dealer Offer Report will show all the fittings plans concatenated.

 

Status: Fixed

  • The rule template definition must end with an empty space to be valid. The problem has been fixed;
  • The discount value on the Project – Statistics tab was not computed correctly. The new value is equal to the discount value on the Offer Report;
  • Changing the some profile geometrical parameter did not affect the current opened project. The new behavior automatically reloads the material database when you make a change;
  • The extra sash tolerance was not applied on insect nets placed over mullions. The problem has been fixed;
  • Changing the customer information on a duplicated project affected also the original project. The problem has been fixed;
  • The join set was exposing some internal properties that were unnecessary. The problem has been fixed;
  • Labor elements added to the material consumption had 0 time duration. Because of that it will not appear on the Handwork report and their cost will be 0. The problem has been fixed;
  • Exception: System.Data.DeletedRowInaccessibleException: Deleted row information cannot be accessed through the row sometimes when trying to delete a rule. The problem has been fixed;
  • Exception: System.NullReferenceException: Object reference not set to an instance of an object when trying to use a profile system that din not have any fittings plan attached. The problem has been fixed;
  • Exception: System.NullReferenceException: Object reference not set to an instance of an object when opening a project in read only made with a currency not available in the current database.
 

Ra Workshop 3.2.2

Release date: December 1, 2010

 

Status: New

  • New way to compute the window price. For those that want to make offers and to compute the window price in other way that from the bill of material we have implemented Typed Priced Windows. The user can overwrite the values computed by Ra Workshop with custom values the he can type in. This feature is very handy for Dealers;
  • Ra Workshop is able to compute all the processing operations needed to manufacture the windows and doors. This feature is able to compute all the operations (holes for handles, for hinges, for ventilation, etc.) that machines have to do. The processing operations can be exported to CNC machines to increase speed and accuracy;
  • New CNC machine: Elumatec SBZ 610 – cutting machine;
  • New CNC machine: Elumatec SBZ 608 – machine center;
  • New CNC machine: Sturtz SE-SL-HSM 30/26 – 4 corner welding machine;
  • New type of profile system: vertical sliding;
  • Window/door gap is now available. You can difine the gap were the window/door is going to be placed. You can adjust the window/door based on the gap size and the frame tolerance;
  • You can add surface elements (like: glass, panels, etc.) with price per piece. Up to now you could only have price per square meter;
  • New extra cost groups were added for irregular shaped glass and panels. This new feature allows you to define different extra costs for the irregular shapes;
  • A new type of extra cost groups has been added. You can add taxes. With this new feature you can add multiple taxes and control the way are applied;
  • We have introduced a new concept: extra item. This type of element can be displayed independently on the quote reports. This will help your customer to better understand your offers;
  • Bar codes for CNC machines that have printers;
  • Ra Workshop is now available in new languages: Russian, Bulgarian, Spanish, French and Croatian;
  • A new cutting optimization option has been added. You can now control the length of the mandatory remainders and both sided of the profile bar. This is useful for CNC machines that require a minimum rest in order to function properly.

 

Status: Improved

  • We added a new way to view the windows/doors. In the old version the inner openings were viewed from inside and the outer openings were viewed from outside. Now you can choose the view mode: inner view vs. outer view;
  • You have complete control over the drawing of accessories. In the old version you had only one option: Draw accessories. Now you have two: Draw handles and draw hinges.
  • His is helpful for those users that have concealed hinges;
  • The sliding sash was automatically calibrated. Now you can control the size of the sliding sash;
  • The Modify Dimension of the extension profile was forward also to the extension object.
  • Now you can modify this property for all sides with one click. This property is also available in the application Options to set the default value;
  • New parameters were introduced to the fittings/labor/processing engine: Profile orientation, Profile position, Reinforcement, Color type and Alignment;
  • The rule function mechanism has been improved. Now you can use functions to compute: quantity, length, surface and time;
  • The louver design has been improved. You can now place louvers inside shapes with arcs (ex: circle);
  • While designing windows/doors with a shutter profile system the software was placing glass inside by default. The behavior has been improved and now it adds louvers by default;
  • The cutting optimization algorithm was improved. The optimization will work faster on large and very large projects;
  • The selection mechanism was improved. Now you can work with large and very large projects (more than 100 components) and the selection will be fast;
  • The memory management and collection has been improved. The new version will work faster and will use less memory.

 

Status: Updated

  • All the quote reports have been updated to show the new extra costs and the taxes.
  • The statistics tab has been redesigned and the values displayed are computed in such a way to help you better understand your project;
  • The sliding windows design was reviewed. Some strange behaviors have been removed and some new features have been added;
  • Quote reports, Window Panel and Execution Plan were updated and a new option has been added. You can now show windows/door with inner/outer view;
  • The cutting optimization dialog now saves the selected options.

 

Status: Fixed

  • When trying to create a compound profile with itself the application generated an exception. The problem has been fixed. You cannot make a compound profile with itself;
  • An exception was raised when you tried to copy/paste a frame with extension. The problem has been fixed;
  • Exception: System.ArgumentNullException: Value cannot be null while opening the Option dialog if the previous tab selected was Other. The problem has been fixed;
  • You cannot remove a profile while it was selected in the Project Explorer. The new behavior allows this operation;
  • Exception: System.NullReferenceException: Object reference not set to an instance of an object was generated sometime. A red X was displayed in the Project Explorer instead of the regular information. The problem has been fixed.

Ra Workshop 3.1.1

Release date: November 26, 2008

 

Status: New

  • Development of the users and user groups mode. Access for each user is based on the rights given by the administrator. The access can be restrained based on the activity of the user on the application;
  • Added support for the companies that work in dealer type partnerships. This support feature includes the possibilities of protecting the information about the materials used, about the extra costs, about the calculation details of the offers created by the Dealer.
    Client/Server. Ra Workshop is the only Romanian carpentry software application (of what we know) that has the client/server 3 tier version (on 3 levels). For big companies with carpentry workshops the client/server version is mandatory. This type of build is the best method for a self-acting production;
  • Manual labor calculation. The new version calculates the time and cost of manual labor operations that need to be done for a project;
  • New report: Client Table Offer. Contains the same information as the Client Offer without the window designs. The resulting report is more compact;
  • New report: Dealer Offer. Contains the same information as the Client Offer but the offer calculations is different. This has only the value of the carpentry. Optionally the glass value can be added;
  • New report: Dealer Table Offer. Contains the same information as the Dealer Offer without the window designs. The resulting report is more compact;
  • New report: Glass table. The report contains the glass designs with the window quotations. It is used for glass ordering for irregular shapes;
  • New report: Manual labor. Gives information about the manual labor operations.
  • New report: Project Status. The report presents the state of the projects from the database;
  • User Warning. When calculating a structure the user is warned about the possible errors it might contain. (I.e.: glass is missing, joining profiles of different thickness, window dimensions for which there are no fittings, etc.);
  • Production Project. The offers can be grouped into a production project for optimization and production;
  • Added new irregular shape: semi-oval;
  • Panel calculation. They are calculated differently from the glass: they become part of the carpentry cost;
  • Added new types of extra costs: loss, montage, transport, discount;
  • Numerical Command (CNC). CNC – Profile Cutting: Elumatec: E255/A, E555/1, Rotox: ZGS 314, Kaban: 1030, 1040 (InfoSys 2.0), Pertici: 500F2K, Techna: TK145/10 Gold. CNC – Profile Welding: Sturtz: 4HSM_JC, 4VSM_JC.

 

Status: Improved

  • Easy offering. A new mode of designing has been introduced: the wizard tool (this will guide the user through all the steps required to create a new component);
  • Security access for extra costs. These are grouped upon access levels. Only the users with the required access level can view and edit the extra costs;
  • Cutting Optimization: Added the possibility to optimize at two bars;
  • Optimization based on production lot (based on the number of pushing-cart cells);
  • Optimization options additions: irregular shapes exclusions, exclusion of components that contain irregular shapes, exclusion of segments with angles different from 90 and 45 degrees;
  • Added the possibility of exclusion from the optimization of the segments available between certain dimensions. (I.e.: segments that cannot be cut by the machine automatically);
  • Added possibility to set the type of optimization and the number of windows in the lot for each profile code;
  • Added possibility of adjusting the offer based on the optimization. The excess resulted from the optimization can be calculated in the offer.

 

Status: Updated

  • Modified Cutting Optimization Report. The new report presents visually the profile bar and the way the segment will be cut. The report was improved by adding information about the cellule and pushing-cart in which the cut segment will be placed;
  • Different way of introducing cutting quotations. All cuts will be made in absolute quotations;
  • Modified mode of identifying segments (references). The new system is very easy to interpret (it is similar to the one in version 2.4.1);
  • Modified Client Offer Report. Added options for report creation. Some of these are: discount, montage, material information, etc.;
  • Modified Execution Plan Report. The new report version displays the information in a more user friendly way (like in version 2.4.1);
  • Modified Window Panel Report. The report has been updated with new options. In addition the designs display the quotations of the mullions outside the wing;
  • Modified Glass Order Report. The report calculates the surfaces of every type of glass;
  • Modified shutter and insects net designing. The designing has been improved and is now more user friendly.
 

Ra Workshop 3.1.2

Release date: April 06, 2009

 

Status: New

  • Added possibility of tendering insect nets with price per square meter. Insect net estimations were possible only if you had an insect screen profile system defined in your database. As most users want to make offers based on the price per square meter we have added this feature too;
  • Added possibility of tendering shutters with price per square meter. Shutters estimations were possible only if you had an shutter profile system defined in your database. As most users want to make offers based on the price per square meter we have added this feature too;
  • The Bill of Material report is now available starting with Express edition;
  • Added the possibility do design doors directly. On the design board we have added to new buttons for doors;
  • Added automatic hardware computing for irregular shaped windows. Until know the hardware was computed based on the window shape. Now the window shape is ignored;
  • Added new property: Generate Consumption. All the elements on the design board have this property. This way you can control if you want that element in the bill of material or not;
  • New shortcut: Add component Ctrl + W;
  • New shortcut: Add wizard component Ctrl + D;
  • New shortcut: Reload database Ctrl + R;
  • New shortcut: Optimization Ctrl + P.

 

Status: Improved

  • The PVC profiles computing has been modified. Now the welding tolerance is computed perpendicular on the welding surface;
  • The Project Navigator did not showed the project code. The new version does;
  • The project size was reduced with 50%;
  • The project loading speed was increased with 25%.

 

Status: Updated

  • Offer report change. The new reports show detailed information for insect nets and shutters;
  • Offer report change. The new reports show detailed information about extra profiles: ledge, extensions, joins, etc.;
  • Glass Order Report update. The old report showed the bounding rectangle for irregular shaped glass. The new report makes the user aware of the irregular shape. You can use Glass Panel to create an order for irregular shaped glass.

 

Status: Fixed

  • The total joinery surface included also insect screen surface and shutter surface. The new behavior adds only the window and door surface;
  • Data import failed if you check “Delete un-imported data”. The problem has been resolved;
  • The Profile Order report did not compute correctly the profile weight. The problem has been resolved.

Ra Workshop 3.0.3000

Release date: February 15, 2008

 

Status: New

  • Added numerical order feature (CNC);
  • Added project export in text format, for a easier import in other applications, like accounting applications and others;
  • New report added: Total Order, it contains all the information necessary to answer accordingly to an offer request;
  • New type of project: Windows Library, the user can add, modify or erase window libraries;
  • Adding new options for optimization: exclusion of curve segments from optimization, exclusion of angles different from 45 or 90, exclusion of segments outside a given interval;
  • User’s guide. The application contains a complete user’s guide, the documentation for it is also available online

 

Status: Improved

  • The possibility to rename a window from a Window Library;
  • The possibility to modify the total of consumption;
  • The possibility to modify the Export/Import data. Even from the Export stage, the user can set the options that will be used at the Import. This feature is very important for manufacturers (profile sellers);
  • A faster optimization process. For big projects, with this SP2 the time for optimization will be at 20% of the time for the process in the previous version application;
  • A makeover for the reports. The reports may contain now information about the client, and the graphics are seriously improved;
  • Revision for the saving/restoring projects. These operations are now more user friendly and the time for these processes has been dramatically reduced;
  • A better transom-mullion division. For the wings that contain glass, it will be possible to divide them without loosing the glass;
  • English version 100% localized.
 

Ra Workshop 3.0.4000

Release date: May 06, 2008

 

Status: New

  • We completed the server – client version. Two new products are now available: Ra Workshop Server and Ra Workshop Client;
  • Ra workshop is now available in Turkish;
  • New types of profile (especially for shutters and fly screens profiles);
  • New feature for designing of fly screens. Now they can be done with only one click: fly screens as type rolling pin, fly screens with frame, fly screens without frame (only sash);
  • New feature for designing shutters. Now they can be done with only one click: shutters as type rolling pin, shutters with frame, shutters without frame;
  • Adding support in localizing the units of measurement;
  • Adding a new report: Assembly List – Standard with weights, showing the quantity of profiles in Kg;
  • Adding a new report: Assembly List – Complete, shows the weight of profiles not only in Kg but also in meter.

 

Status: Updated

  • Cutting Quotations report modification. The report can now be in a standard mode (which means that the cuttings of the same profile are summed up) or detailed (each reference has it’s own cuttings showed);
  • Client Offer report modification. The report contains now also the address of the client;
  • Window Panel modification report. The report now contains options of display for information about the client.

 

Status: Fixed

  • Possibility of change for the implicit currency. In the previously version, that was not possible;
  • A change in the way the reports show the angles for pivot windows. In stead of 3 angles of 135 degrees, the new version of the application will show angles of 45 and 90 degrees;
  • An alteration in the behavior of Undo/Redo. In the previous version after an Undo/Redo the application didn’t recalculate automatically the consumption. The problem has been resolved;
  • An update for the available glazing beads, every time the glass is changed. In the previous version, hen the glass was changed with another one of different size, the program didn’t immediately reconsider the glazing beads list. The behavior has been corrected;
  • The erasing of an element when the focus was in the consumption tab, determined a peculiar behavior: he was erasing every element there was, one by one. The behavior has been corrected;
  • Consumption calculation after Copy/Paste. The previous version was duplicating the consumption. The behavior has been corrected;
  • Completion of English localized. In the previous version there were English texts that weren’t fully localized, now they are.

Want to get started?

You can use the feedback form below to submit any questions you have or chat with us in real-time using the live chat feature.

By sending this message you opt in to receive marketing communications from us

Pyramid Software Headquarter

Str. Doamna Oltea Nr. 76 Sector 2,
020231 Bucharest, ROMANIA

Technical Support

Sales

© Copyright 2020 RA Workshop

en_USEN
fr_FRFR ro_RORO es_ESES bg_BGBG en_USEN

Up to this moment, Ra Workshop has already implemented the following list of machines.

Cutting centers: Elumatec E555/1 (DGX), Elumatec E255/A, Elumatec SBZ610, Graf Synergy Multifab 3000, Graf Synergy EX1 Protocol, Kaban Cut, Kaban 1030 / 1040 / 1070 (InfoSys), Murat TT 405, Murat Maxer, Pertici 500F2K, Pertici SC55, Rotox ZGS 314, Techna TK145/10 Gold, Soenen Hendrix DVE

Welding centers: Graf Synergy SL4FF, Graf Synergy AKS6100, Kaban, Murat, Sturtz 4HSM_JC, Sturtz 4VSM_JC, Sturtz SE-SL-HSM 30/36), Murat,
Soenen Hendrix Q4, Soenen Hendrix AKS1600, Soenen Hendrix 4HSM_JC/4VSM_JC

Machining centers: Articon SC-231, Elumatec SBZ 608, Graf Synergy STB Multifab 3000, Graf Synergy FAB CUT F1, Graf Synergy Fa1 Protocol, Kaban FA 10xx, Kaban SB3010, Mecal Kosmos 305, Murat NR 210, Murat SC220-40, SAC Sueri F300, Soukup Drilex, Soukup Spectra, Thorwesten PBZ

Profiling and tenoning: Soukup Wizzard, Soukup Crafter, Soukup Crossline 500

Please bare with us as we are sending your request to our servers. You may close this pop-up but please don't close the download page.